Dispensing and weighing isolators
Enclose the weighing and dispensing of APIs and excipients. Configurations may include a weighing balance, glove ports, filtered airflow and a contained transfer interface.
Formulation isolators are enclosed systems used to contain powder handling during dispensing, granulation, compression and related operations. UPHILL Engineering & Innovations Pvt. Ltd. works with customers to configure isolator solutions around process, material transfer and cleaning requirements.
The following are common application types. Final equipment scope and features are confirmed for each project.
Enclose the weighing and dispensing of APIs and excipients. Configurations may include a weighing balance, glove ports, filtered airflow and a contained transfer interface.
Support contained sampling from process equipment or material containers. Sampling ports, sample containers and cleaning provisions are selected for the material and procedure.
Provide containment at charging and discharge points for granulation equipment, such as a rapid mixer granulator or fluid bed dryer, subject to the process layout.
Enclose powder size-reduction and screening operations, with equipment interfaces and dust collection designed around the required workflow.
Support contained loading and unloading of blenders. Split butterfly valves, rapid transfer ports or other interfaces may be considered for transfer.
Containment enclosures can be configured around tablet compression or coating operations, including access, discharge and cleaning requirements.
Provide a contained workspace for in-process checks such as tablet weight, hardness, thickness and friability, with instrument placement and waste handling considered in the design.
Formulation isolators typically prioritize powder containment and operator protection. The specific containment strategy should follow a documented hazard assessment and project requirements; performance targets should be supported by appropriate testing.
Construction in SS 316L, PLC/HMI controls, differential-pressure monitoring and clean-in-place or wash-in-place features may be specified where appropriate. OEL/OEB or containment claims should only be made when supported by project-specific evidence.
| Application | Main purpose | Typical process area |
|---|---|---|
| Dispensing | Contained weighing and dispensing | Raw material handling |
| Sampling | Contained material sampling | Process and material handling |
| Granulation | Containment at equipment charging and discharge | Granulation and drying |
| Milling and sifting | Containment during size reduction and screening | Powder processing |
| Blending | Contained powder transfer | Blending |
| Compression and coating | Containment around tablet processing | Tablet production |
| IPQC | In-process checks within a contained workspace | Production floor |
A formulation isolator is an enclosed system used to contain powder-handling operations in pharmaceutical manufacturing. Its design, filtration and pressure regime are selected for the process and containment requirements.
An OSD product is a dry pharmaceutical dosage form, such as a tablet or capsule, made from an active pharmaceutical ingredient combined with excipients. Depending on the product, manufacturing may include granulation, compression, coating and packaging.
A dispensing isolator encloses the weighing and dispensing of ingredients. Airflow, filtration and pressure are configured to suit the material, exposure-control target and process.
Injectable isolators are generally designed to protect sterile product and maintain aseptic conditions. Formulation isolators are generally designed to contain powders and control operator exposure. Airflow, pressure and decontamination approaches depend on the application.
An isolator provides a closed working enclosure and can be configured for containment, while a fume hood or laminar airflow unit has a different airflow and protection purpose. Choose equipment based on the material hazard assessment and required containment performance.
Contained powder transfer can use split butterfly valves, rapid transfer ports, continuous liners or another process-specific interface. Selection depends on the material, connected equipment and cleaning requirements.
IPQC, or in-process quality control, comprises checks performed during production. For tablets, checks may include weight, hardness, thickness and friability, according to the product specification and quality procedures.
Share your process steps, materials, transfer points and cleaning requirements so the equipment scope can be evaluated for your application.